Avoid trapping anyone in a vehicle in a collision. The seat belt latch plate is above the back of the front seat, next to your arm in the rear seat. Remind all children in the vehicle that the seat belts are not toys and should not be played with, and never leave your child unattended in the vehicle. These are air exhausters that provide the means for regular exchange of cab air. Never use a floor jack directly under the differential housing of a loaded truck or damage to your vehicle.
Serviceable replacement ball joints are available. It also engages the steering wheel lock if equipped when the steering wheel is turned. Never use an abrasive type cleaner. This section only covers those subjects that are unique to these vehicles. Lower the jack all the way down by turning the jack turn-screw until the jack is snug.
You are urged to read these publications carefully. The higher displayed tem- perature is due to blocked or reduced airflow to the underhood ambient temperature sensor by the snow- plow. The transfer case Neutral N position is to be used for recreational towing only. Oxygen- ates are required in some areas of the country during the winter months to reduce carbon monoxide emissions. We strongly recommend that you take your vehicle to your selling dealer.
On Quad Cab and Mega Cab models the rear of the floor console offers a power outlet, a tip out bin and a rear air duct Mega Cab Only. Use tires of the recommended load capacity for your vehicle. This may allow the airbag to have different rates of inflation that are based on collision severity and occupant size. These include all of the items listed above except the knee bolsters, the instrument panel, and the steering wheel and column. Air Cleaner Assembly Inspect air cleaner housing for proper assembly and fit.
Turn the knob clockwise to one of the four positions to obtain the blower speed you desire. The sunroof will close fully and stop automatically. Allow the belt to return to the retractor, pulling on the excess web- bing to tighten the lap portion about the child re- straint. Find your 2006 Dodge Ram 2500 repair manual right now at Chilton. Components should be replaced immediately if there is any evidence of wear or damage that could cause failure. This may result in serious injury or death. Fasten and adjust the seatbelts.
Verify that it is locked in place. Confidential data will not be disclosed by DaimlerChrysler Corpora- tion to any third party except when: 1. Check spare tire for proper pressure and correct stowage. These vehicles can be identified by the unique fuel filler door label that states Ethanol E-85 or Un- leaded Gasoline Only. If the ignition is off and any door is left ajar for 10 minutes or the dimmer control is rotated upwards for 10 minutes, the interior lights will automatically turn off. Operation is subject to the following conditions: 1.
You might not have brakes when you need them and could have an accident. Chains are not recommended for freeing a stuck vehicle. Noise Emission Warranty The manufacturer warrants that this vehicle as manufac- tured by the manufacturer, was designed, built and equipped to conform at the time it left the manufacturers control with all applicable U. Fold the flap and roll the jack tool kit into a cylindrical package in direction of arrows , and tie to the jack using the tie straps. Turning the volume control to the right increases the volume and to the left decreases it. Retighten the wheel nuts in the same sequence to the torques listed in the table.
Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. In a collision, people riding in these areas are more likely to be seriously injured or killed. . To enable the window controls, press the window control button again. Then pull on the belt until it is all removed from the retractor.
Grasp the knob on the load floor and lift the knob until the load floor unfolds into position. This may result in a slightly different feeling or response during normal operation in the upper gears. These, and all other maintenance services included in this manual, should be done to provide best vehicle performance and reliability. Reverse procedure for installation of bulbs and hous- ing. Rear Cupholder — Mega Cab Mega Cab vehicles are equipped with rear cupholders located in the center armrest.