2008 gmc canyon manual. GMC Canyon Workshop & Owners Manual 2019-05-01

2008 gmc canyon manual

Free Online Chevrolet Colorado / GMC Canyon Service Manuals

2008 gmc canyon manual

Refer to Symptoms - Engine Exhaust in order to identify the correct procedure for diagnosing the system. Install the 3 nuts attaching the catalytic converter to the exhaust manifold. Maybe you need the manual to fix the brakes on your Canyon, or possibly replace some worn out suspension components. Remove the exhaust manifold seal from the exhaust manifold flange. A several-speed guidebook transmission is regular with the 4-tube engine in Standard and Prolonged Cabs. Production ended on April 29, 2004.

Next

GMC Canyon Repair Manual

2008 gmc canyon manual

Refer to Exhaust System Description. Remove the nuts securing the muffler to the catalytic converter. Refer to Exhaust Seal Replacement. Refer to Fastener Tightening Specifications. Position the catalytic converter to the exhaust manifold.

Next

2008 GMC Canyon Workshop Service Repair Manual

2008 gmc canyon manual

Tighten the exhaust manifold bolts in sequence. Old paper repair manuals just don't compare! Refer to Exhaust Seal Replacement. Road test the vehicle in order to verify the repair. Intermittent Test the vehicle under the same conditions that the customer reported in order to verify the system is operating as designed. Tighten the exhaust manifold bolts in sequence. Does the reading exceed the specified value? Exhaust system component connection welds leaking Replace the leaking component. Position the catalytic converter to the exhaust manifold.

Next

2008 GMC Canyon Workshop Service Repair Manual

2008 gmc canyon manual

Refer to Heated Oxygen Sensor 2 Replacement orHeated Oxygen Sensor 2 Replacement e. You will have all the service information you could ever need for your vehicle. Refer to Exhaust Manifold Replacement 2. Install the right torsion bar. The Alero was Oldsmobile's last compact car as well as the last vehicle sold under the brand. The Alero was sold either as a 4-door sedan or as a 2-door coupé.

Next

2008 GMC CANYON Service Repair Manual

2008 gmc canyon manual

Seats are vinyl, floors are hose-it-out rubberized, and only the base suspension is readily available. Refer to Lifting and Jacking the Vehicle. Remove the exhaust manifold and the gasket from the engine. Refer to Fastener Tightening Specifications. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Repair or replace the faulty hanger, or heat shield.

Next

2008 GMC Canyon Auto Repair Manual

2008 gmc canyon manual

Refer to Hot Exhaust System Caution in Cautions and Notices. External rattle or vibration noise 1. Install the 3 nuts attaching the catalytic converter to the exhaust manifold. Remove the nuts securing the muffler to the catalytic converter. The Crew Cab has a rear seat suitable for mature people. Install the 2 nuts securing the muffler to the catalytic converter.

Next

2008 GMC Canyon Workshop Service Repair Manual

2008 gmc canyon manual

Remove the lower shock absorber nuts 9 and bolts 8. All Aleros were built in Lansing, Michigan. Remove the 3 nuts attaching the catalytic converter to the exhaust manifold. Install the 3 nuts attaching the catalytic converter to the exhaust manifold. Refer to Heated Oxygen Sensor 2 Replacement or Heated Oxygen Sensor 2 Replacement. Muffler or resonator, if equipped, damaged or leaking at the seams Replace the affected muffler or resonator, if equipped.

Next

GMC Canyon Repair Manual

2008 gmc canyon manual

Remove the nuts securing the muffler to the catalytic converter. Position the muffler rearward, enough to allow the studs located in the front to clear the catalytic converter pipe flange. Raise and support the vehicle. Refer to Heated Oxygen Sensor 2 Replacement orHeated Oxygen Sensor 2 Replacement. Raise and support the vehicle. Refer to the affected components procedure for service. Popping or hissing noise Exhaust leak - Refer to Exhaust Leakage.

Next

GMC Canyon Repair Manual

2008 gmc canyon manual

Wedge a block of wood 5 between the frame 4 and the rear axle 6. Remove the exhaust manifold bolts. Position the catalytic converter to the exhaust manifold. Observe the exhaust system back pressure reading on the gage. Exhaust manifold cracked or broken Replace the exhaust manifold. Refer to Heated Oxygen Sensor 2 Replacement orHeated Oxygen Sensor 2 Replacement.

Next

2008 GMC Canyon Owners Manual PDF

2008 gmc canyon manual

This could affect the operation and proper performance of the exhaust system. Inspect for a exhaust pipe causing interference. Refer to Exhaust System Insulator, Hanger, Bracket Replacement. Align the catalytic converter with the studs located in the front of the muffler. Tighten the exhaust manifold bolts in sequence to 20 N. When finishing this diagnostic table, be sure to clear all codes. Turn the engine off and place the ignition in the lock position.

Next