I honestly do recommend Go-Parts! No one locally had the part because the vehicle was too new, and the online stores had a somewhat high mark-up on their parts. Get ready to remove the Taillight housing. The Modified Life staff has taken all its Nissan Versa headlight bulb replacement guide, 2012 Nissan Versa replace light bulb size guides, Nissan Versa light bulb replacement guides and cataloged them online for use by our visitors for free. Here's a quick guide to changing the Taillight bulb on a 2006-2013 Nissan Versa Hatchback. Our Nissan Versa light bulb guides allow you to easily replace light bulbs, replace headlight bulb, change a broken lightbulb, install a hid headlight conversion or install led light bulbs instead of spending countless hours trying to figure out which light bulb sizes in your 2012 Nissan Versa. To create this article, volunteer authors worked to edit and improve it over time.
Then gently pry out the two plastic access panels with the flathead screwdriver and set them aside in a safe place. When vehicles electrical system shut down the final time a fire was ignited under the hood. This video demonstrates how to change a burnt out taillight bulb on your 2013 Nissan Versa. Use of the 2012 Nissan Versa replacement bulb size information is at your own risk. When changing the tailight bulb on your Versa, be careful not to touch the glass part of the new bulb as this will cause the tailight bulb to burn out quicker.
. Always verify all light bulb sizes, bulb voltage usage and bulb wattage before applying any information found here to your 2012 Nissan Versa. To avoid scratching the bumper or tail light, place a towel between them. Use a pair of needle nose pliers and get the light out. Then gently pry out the two plastic access panels with the flathead screwdriver and set them aside in a safe place. Turn the tail light assembly down on to the bumper. There are either 3 or 4 nuts holding the tail-light assembly in place, which means youll need to take out most of the inner panels to access the others.
Carefully push the tail light on to the rear of the vehicle. Donations are not tax deductible. I had a bulb burn out on the Versa, so it's time to replace it. If you have magnetic sockets, this would be a great time to use one. The light grey reverse light bulb socket is located at the edge of the housing closest to the center line of the vehicle.
No matter the situation, Advance Auto Parts has the Tail Light Assembly product you desperately need. Remove the nuts and screws, then remove the taillight. The black plastic brake light bulb socket is located closest to the outside edge of the vehicle. Then spin it off by hand to prevent it from dropping down into the cargo area's interior panels. The upper 10mm bolt is covered by a wire loom and power connector attached to it.
Video of burning car can be seen here:. Remove the screws and pull the bottom out and the top is held in by two retainers that should just slide right out Posted on Oct 13, 2009 I changed my wife's last night and there is no need to take the tail light housing out. Keep up with me between uploads on Instagram: basinmotorsports. It's a 10 minute job, so let me show you how easy it is to change a bulb in the tailight. In some cases, the order may ship the next business day.
Check out the tools and materials that I use at Basin Motorsports: I'm an Engineer and Consultant by day, and a car enthusiast by night. It is possible for the turn signal or brake light to work but the tailight part to be burnt out - replacing the bulb on your Versa will restore functionality to both. Easy Returns Guaranteed We offer a no-questions 100% money back guarantee on all items returned within 60 days of delivery. If you're removing the taillamps with the bumper off there are 3 nuts and screws that hold the taillight to the rear panel of the car that have to come off from the inside of the trunk. Tighten the nuts with the socket and ratcheting wrench. Most in-stock orders will ship out within 24 hours and will reach customers within approximately a week.
Pilot offers one of the most comprehensive assortments in the automotive aftermarket industry. There may be an interior trunk trim panel that you have to take off but in most cases its just a series of thumb screws that hold them in. We only sell parts from trusted brands like so that you can find quality parts you can count on. To create this article, volunteer authors worked to edit and improve it over time. Replace the two rectangular plastic access panels at the rear corner of the cargo area.
This vehicle had an electrical problem. Once both nuts are removed, proceed to the outside of the taillight assembly and gently insert a flat head screwdriver between the taillight and vehicles body, starting at the bottom of the Taillight. Pull the white plastic part of the wire harness straight off the threaded bolt end. For more, check out my other. On top of low prices, Advance Auto Parts offers 3 different trusted brands of Tail Light Assembly products for the 2012 Nissan Versa. If you're removing the taillamps with the bumper off there are 3 nuts and screws that hold the taillight to the rear panel of the car that have to come off from the inside of the trunk. Hold the tail light with one hand while spinning on the two 10mm nuts.